Global helium(He) shortage is a challenging problem; however, the types of helium source rock and the mechanisms of He generation and release therein remain still poorly understood. In this study, in order to evaluate the potential of granite as an effective helium source rock, we collected granitic samples from the North Qinling Orogen, Central China, in the south of the helium-rich Weihe Basin. The helium generation and release behaviors in granite were studied through analysis of U and Th concentrations, EMPA images, and He and Ar concentrations and isotopic ratios extracted by crushing and stepwise heating. The results indicate that Ar has a better retention and a lower mobility than He. 3 He/4 He ratios released by crushing and stepwise heating are 0.016–0.056 RA and 0.003–0.572 RA, respectively, where RA is the atmospheric 3 He/4 He of 1.4×10-6, reflecting a crustal and radiogenic source. Helium concentrations extracted by the two ways are 0.13–0.95 ucm3 STP/g and 7.82–115.62 ucm3 STP/g, respectively, suggesting that matrix-sited He accounts for more than 98% of total helium preserved in granite. In addition, the total generated He amounts in granites are calculated based on the measured U and Th concentrations in granitic samples. Dividing the preserved He quantities by the generated He amounts, it turned out that less than 10% of He produced since the formation of the granite is preserved in the rock over geological time, suggesting that more than 90% generated He can be transferred to the Weihe Basin. Temperature and fracture are the two critical factors controlling He release. Based on the relationship between He diffusivity of granites and temperature and the He closure temperatures of a variety of U-and Th-rich minerals(27–250°C), we estimate that He can be partially released out of granite at the depths 400 m and totally released at the depths 7800 m. Fractures provide effective transfer of free He from deep source rocks to shallow reservoirs. Finally, a model on granite as an effective helium source rock is established. We suggest exploring He resources in hydrocarbon basins with granitic basement(or adjacent to granite bodies), high geothermal field, and young active fractures. 相似文献
The Carboniferous period lasted about 60 Myr, from ~358.9 Ma to ~298.9 Ma. According to the International Commission on Stratigraphy, the Carboniferous System is subdivided into two subsystems, i.e., Mississippian and Pennsylvanian, including 6 series and 7 stages. The Global Stratotype Sections and Points(GSSPs) of three stages have been ratified, the Tournaisian, Visean, and Bashkirian stages. The GSSPs of the remaining four stages(i.e., the Serpukhovian, Moscovian,Kasimovian, and Gzhelian) have not been ratified so far. This paper outlines Carboniferous stratigraphic subdivision and correlation on the basis of detailed biostratigraphy mainly from South China, and summarizes the Carboniferous chronostratigraphic framework of China. High-resolution biostratigraphic study reveals 37 conodont zones, 24 foraminiferal(including fusulinid) zones, 13 ammonoid zones, 10 brachiopod zones, and 10 rugose coral zones in the Carboniferous of China. The biostratigraphic framework based on these biozones warrants the precise correlation of regional stratigraphy of China(including2 subsystems, 4 series, and 8 stages) to that of the other regions globally. Meanwhile, the Carboniferous chemo-, sequence-,cyclo-, and event-stratigraphy of China have been intensively studied and can also be correlated worldwide. Future studies on the Carboniferous in China should focus on(1) the correlation between shallow-and deep-water facies and between marine and continental facies,(2) high-resolution astronomical cyclostratigraphy, and(3) paleoenvironment and paleoclimate analysis based on geochemical proxies such as strontium and oxygen isotopes, as well as stomatal indices of fossil plants. 相似文献
In thermal-related engineering such as thermal energy structures and nuclear waste disposal, it is essential to well understand volume change and excess pore water pressure buildup of soils under thermal cycles. However, most existing thermo-mechanical models can merely simulate one heating–cooling cycle and fail in capturing accumulation phenomenon due to multiple thermal cycles. In this study, a two-surface elasto-plastic model considering thermal cyclic behavior is proposed. This model is based on the bounding surface plasticity and progressive plasticity by introducing two yield surfaces and two loading yield limits. A dependency law is proposed by linking two loading yield limits with a thermal accumulation parameter nc, allowing the thermal cyclic behavior to be taken into account. Parameter nc controls the evolution rate of the inner loading yield limit approaching the loading yield limit following a thermal loading path. By extending the thermo-hydro-mechanical equations into the elastic–plastic state, the excess pore water pressure buildup of soil due to thermal cycles is also accounted. Then, thermal cycle tests on four fine-grained soils (natural Boom clay, Geneva clay, Bonny silt, and reconstituted Pontida clay) under different OCRs and stresses are simulated and compared. The results show that the proposed model can well describe both strain accumulation phenomenon and excess pore water pressure buildup of fine-grained soils under the effect of thermal cycles.
In many arid ecosystems, vegetation frequently occurs in high-cover patches interspersed in a matrix of low plant cover. However, theoretical explanations for shrub patch pattern dynamics along climate gradients remain unclear on a large scale. This context aimed to assess the variance of the Reaumuria soongorica patch structure along the precipitation gradient and the factors that affect patch structure formation in the middle and lower Heihe River Basin (HRB). Field investigations on vegetation patterns and heterogeneity in soil properties were conducted during 2014 and 2015. The results showed that patch height, size and plant-to-patch distance were smaller in high precipitation habitats than in low precipitation sites. Climate, soil and vegetation explained 82.5% of the variance in patch structure. Spatially, R. soongorica shifted from a clumped to a random pattern on the landscape towards the MAP gradient, and heterogeneity in the surface soil properties (the ratio of biological soil crust (BSC) to bare gravels (BG)) determined the R. soongorica population distribution pattern in the middle and lower HRB. A conceptual model, which integrated water availability and plant facilitation and competition effects, was revealed that R. soongorica changed from a flexible water use strategy in high precipitation regions to a consistent water use strategy in low precipitation areas. Our study provides a comprehensive quantification of the variance in shrub patch structure along a precipitation gradient and may improve our understanding of vegetation pattern dynamics in the Gobi Desert under future climate change.
Reservoirs of lowland floodplain rivers with eutrophic backgrounds cause variations in the hydrological and hydraulic conditions of estuaries and low-dam reservoir areas, which can promote planktonic algae to proliferate and algal bloom outbreaks. Understanding the ecological effects of variations in hydrological and hydraulic processes in lowland rivers is important for algal bloom control. In this study, the middle and lower reaches of the Han River, China, a typical regulated lowland river with a eutrophic background, are selected. Based on the effect of hydrological and hydraulic variability on algal blooms, a hydrological management strategy for river algal bloom control is proposed. The results showed that (a) differences in river morphology and background nutrient levels cause significant differences in the critical threshold flow velocities for algal bloom outbreaks between natural river and low-dam reservoir sections; there is no uniform threshold flow velocity for algal bloom control. (b) There are significant differences in the river hydrological/hydraulic conditions between years with and without algal blooms. The average river flow, water level and velocity in years with algal blooms are significantly lower than those in years without algal blooms. (c) For different river sections where algal blooms occur and to meet the threshold flow velocities, the joint operation of cascade reservoirs and diversion projects is an effective method to prevent and control algal blooms in regulated lowland rivers. This study is expected to deepen our understanding of the ecological significance of special hydrological processes and guide algal bloom management in regulated lowland rivers. 相似文献
The Large Sky Area Multi-Object Fiber Spectroscopic Telescope(LAMOST) is the largest existing spectroscopic survey telescope, having 32 scientific charge-coupled-device(CCD) cameras for acquiring spectra. Stability and automation of the camera-control software are essential, but cannot be provided by the existing system. The Remote Telescope System 2 nd Version(RTS2) is an open-source and automatic observatory-control system. However, all previous RTS2 applications were developed for small telescopes. This paper focuses on implementation of an RTS2-based camera-control system for the 32 CCDs of LAMOST. A virtual camera module inherited from the RTS2 camera module is built as a device component working on the RTS2 framework. To improve the controllability and robustness, a virtualized layer is designed using the master-slave software paradigm, and the virtual camera module is mapped to the 32 real cameras of LAMOST. The new system is deployed in the actual environment and experimentally tested. Finally, multiple observations are conducted using this new RTS2-frameworkbased control system. The new camera-control system is found to satisfy the requirements for automatic camera control in LAMOST. This is the first time that RTS2 has been applied to a large telescope, and provides a referential solution for full RTS2 introduction to the LAMOST observatory control system. 相似文献
This paper presents a general framework for predicting the residual drift of idealized SDOF systems that can be used to represent non‐degrading structures, including those with supplemental dampers. The framework first uses post‐peak oscillation analysis to predict the maximum ratio of residual displacement to the peak transient displacement in a random sample. Then, residual displacement ratios obtained from nonlinear time‐history analyses using both farfield and near‐fault‐pulse records were examined to identify trends, which were explained using the oscillation mechanics of SDOF systems. It is shown that large errors can result in existing probability models that do not capture the influence of key parameters on the residual displacement. Building on the observations that were made, a general probability distribution for the ratio of residual displacement to the peak transient displacement that more accurately reflects the physical bounds obtained from post‐peak oscillation analysis is proposed for capturing the probabilistic residual displacement response of these systems. The proposed distribution is shown to be more accurate when compared with previously proposed distributions in the literature due to its explicit account of dynamic and damping properties, which have a significant impact on the residual displacement. This study provides a rational basis for further development of a residual drift prediction tool for the performance‐based design and analysis of more complex multi‐degree‐of‐freedom systems. 相似文献